30V 30A 8 Channel Power Battery Capacity Tester Prismatic Battery Charging And Discharging Tester 

System Features

1.Single point independent, independent charging and discharging steps can be set for each battery test channel.

2.The accuracy of the equipment is 0.05%, the data recording time is 1 s / time, the fastest is 0.1 s / time, and the stability is high.

3.The software has powerful function and friendly man-machine interface.

4.Four wire test interface ensures high measurement accuracy.

5.Modular design concept, easy to maintain.

Equipment Description

LITH high precision battery test system is mainly designed for power battery / battery pack, which can meet  the performance test requirements of power battery pack. The equipment has the characteristics of high power, high precision and high performance. It can charge the equipment voltage from 0 to 60 V and discharge from 60V to 5V, and charge and discharge test and capacity division of batteries with various specifications from 0 to 40A.

Device View

View size of single table (external dimension: length * width * height = 800 * 650 * 178mm)

View dimension of the whole cabinet (external dimension: L * w * H = 790*950*1806mm)

 

Product Specification

	Equipment model	TMAX-CTS-30V30A
	Number of output channels of equipment model	2CH	(2 channels per device)
	Communication mode	RJ45(Network port)
	Charging voltage	DC 0～30V  It can be used to detect and set the voltage range when charging, and the maximum voltage is 30V
	Discharge voltage	DC 30～2V  It can be used to detect and set the voltage range when discharging, and the maximum voltage is 30V
	Charging current	DC 0.02～30A  It can be used to detect and set the current range when charging, and the maximum current is 30A
	Discharge current	DC 0.02～30A  It can be used to detect and set the current range when discharging, and the maximum current is 30A
	Voltage accuracy	±（0.05%RD + 0.05%FS）
	Current accuracy	±（0.05%RD + 0.05%FS）
	Current resolution	1mV	The minimum unit used by a device to detect or set current
	Voltage stability	≤0.05%
	Current resolution	1mA	The minimum unit used by a device to detect or set current
	Current stability	≤0.05%
	Power output range	0.5～Pmax = Vmax * Imax
	Input impedance	≧10 MΩ
	Input power	AC 220V ±10%/50Hz(cabinet power supply mode: three phase five wire)
	Power accuracy	±（0.05%RD + 0.05%FS）
	Current response time	Hardware response time at 30A ：≤50ms
	Time setting range	The time units are h, min and s, and the resolution is 0.1s
	Time accuracy	≤±0.1%
	Recording method	Charging recording time, discharging recording time, static recording time and global recording time
	Recording frequency	100mS～65535S
	Sampling frequency	About 10mS per box
	Charging mode	Constant current and voltage limiting, constant current and constant voltage, constant power charging, constant flow charging test (battery with protection board)
	Charging cut-off conditions	Voltage, current, time, capacity, temperature
	Discharge mode	Constant current, constant power discharge, constant flow discharge test (battery with protection plate)
	Discharge cut-off conditions	Voltage, current, time, capacity, temperature
	Protection function	Abnormal data recovery; Battery reverse connection protection function; Software over-voltage, under voltage, over-current, under current and over capacity protection. The range of voltage and current protection value can be set, and prompt and record after protection;
	Number of single cycle work steps	≤100 steps, with nested loop function
	Continuous working hours	The power of the equipment shall meet the requirements of full load and 365 * 24-hour uninterrupted operation of all channels
	Equipment noise	Less than 60dB
	Circuit structure	Modular structure design, easy to replace and maintain
	VCELL、TCELL	Auxiliary temperature and voltage can be selected and 16 channels in single box can be selected
	Software	1. The software supports various kinds of connection, such as manual suspension connection, software shutdown connection, power interruption connection, equipment communication interruption connection and abnormal stop connection; 2. It supports barcode scanning, and can scan one-dimensional code and two-dimensional code. There are scanning methods such as sequential scanning, channel skipping scanning, loading and disk scanning; 3. Local test detailed data storage, you can view the current test data and historical data of each channel at any time. There are two ways to display the corresponding data and curve. It also supports the export of excel report in single or batch form. In addition, it can set the automatic data export after the test according to the needs. 4. It supports capacity sorting and can grade sort the battery; 5. The Pass /NG results can be judged according to the specified cycle capacity, voltage and time; 6. Support all kinds of work step protection and global voltage, current and temperature abnormal protection, and carry out abnormal alarm, support battery pack overcharge and over discharge protection test; 7. Support channel parallel connection (optional according to equipment); 8. Support unit conversion; 9. Support database server background storage or MES docking; 10. Software offline protection; 11. The software provides free upgrades.
	Operating / storage temperature	0℃～40℃/-10℃～50℃
	Relative humidity of working / storage environment	≤70% RH /≤80% RH (no condensation)
	Equipment maintenance	Non professionals are not allowed to open the case. Check the equipment joint regularly to prevent poor contact.
	Transport	Packaging is suitable for transportation of automobiles, ships, airplanes, trains, etc. rain proof and civilized loading and unloading should be carried out during transportation.