The huge pressure generated by the precision hydraulic cylinder is driven by the hydraulic pressure, and the positioning guide pillar moves up and down through the hydraulic cylinder with high performance.
Eight copper sleeves are more accurate and wear-resistant. The whole process of mold positioning has low noise. The touch screen can be operated to realize manual fine adjustment, man-machine conversation, intelligent control and convenient setting.
Part B: feeding part
The extra long conveying device increases the quantity of materials to be discharged, increases the activity time of employees, and reduces labor. The transmission device adopts German NEY bearing.
Taiwan adjustable speed TWT motor drives wear resistant feeding belt to automatically and accurately feed materials to corresponding stations, which is safe and reliable.
Part C: Pushing
The smart sensor can sense the battery in place in a short distance and quickly transmit signals.
The linear guide rail guides the single cylinder to control the U-shaped pusher block and push the electric core preloading cap. The pre sealing mould has the gland function, and the pre sealing, second sealing, third sealing and sealing are completed at one time.
Part D: Mold closing part
Use the air source pressure to push the Yadeke cylinder to the two-way mold base for cyclic mold closing; Finish the third seal.
The movable die base is made of oil steel by heat treatment and precision machining. The material has excellent performance of wear resistance, corrosion resistance, high temperature resistance, etc.
Optical fiber positioning is provided for pressing, and automatic alarm will be given if the pressure is not reached.
Pre sealed, second sealed, third sealed and dun sealed upper and lower moulds are made of high-quality imported materials with high precision after special vacuum treatment; Wear resistance, corrosion resistance, high temperature resistance and other excellent properties. The mold is not damaged by human activities, and the service life of a single mold is more than 80000.
The upper die of the three seals has the counting function, and the counting function of the die can only be reset under the condition of manual operation.
Part E: oil pressure station
The sealing pressure of the equipment is provided by 5Mpa oil pressure station and 80mm diameter oil cylinder.
Part F: Discharge
The blanking mechanism automatically unloads the battery cell to the discharge chute and removes the finished battery.
The discharging and discharging are on the same side, so that the whole process can be controlled by one person, which greatly reduces the labor cost.
Part G: Electrical
In order to operate more safely and effectively, adjust and test the mold first through the "manual" state, and then enter the "automatic" state after meeting the process requirements. The strict, convenient and safe Mitsubishi Electric program monitors the whole process of the product, multiple inductive switches of the whole machine are connected, and a safety light curtain is equipped; The equipment will alarm automatically in case of abnormal conditions, and stop automatically in case of improper operation. Equipped with "emergency stop" operation, the equipment can be stopped immediately as required at any time.
2.Specification:
1.Rated voltage: 380V, 50Hz
2. Rated power: 4.0KW
3.Working air pressure: 5-6kgf/cm2
4. Weight: 670Kg
5.Efficiency: 30pcs/min
6.Overall dimensions (L * W * H): 1160 (L) * 700 (W) * 1680MM (H), and the extended length of the chute is 410 (S) (can be customized according to the battery model.
Online service
+86 13174506016
