Specifications

Design Fearture

· Easy assembling by only four cap mounting screws

· Easy to separate after test for microstructure analysis

· Space saving, compact design allows you put it into the glove box

Material
(Please select at options bar)

· Nylon or PEEK (Poly Ether Ketone) selectable from product options bar

· Body: Electrolyte corrosive-proof Nylon which can sustain with temperature up to 80ºC and O-ring: Sealed by electrolyte corrosive-proof PTFE O-rings

· Body: PEEK (Poly Ether Ketone), which is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures and O-ring: Sealed by electrolyte corrosive-proof FKM O-rings

Appearance

EQ-SPC-654519

EQ-SPC-804019

EQ-SPC-955208

EQ-SPC-30529525

Inside chamber Dimensions
(Customized size pouch cell are available uponrequest)

· 65 mm H x 45mm W x19 mm Thick

· 80 mm H x 40mm W x 19 mm Thick

· 95 mm H x 52mm W x 8 mm Thick

· 305 mm H x 295.5 mm W x 25.4 mm Thick     

Suggested Max. electrode area

· 60mm H x 40 mm

· 75 mm H x 35 mm

· 80mm H x 50mm 

· 300mm H x 395mm 

Outside Case Dimensions

· 89 mm H x 75 mm W x 53 mm Thick

· 93 mm H x 85 mm W x 55 mm Thick

· 120mm H x 85 mm W x 40mm Thick

· 317.5 mm H x 323 mm W x 86 mm Thick  

Structure

· One digital pressure gauge installed on top to monitor pressure. You may remove the gauge and use 1/4 female port to inject electrolyte into the pouch cell

· Two stainless steel contacts to connect anode and cathode by the screw

· Max. working temperature: 80°C for Nylon, and 120°C for PEEK

· Max. working pressure: 36psi (0.25MPa) for Nylon and 60psi (0.4Mpa) for PEEK

· 

Application Note

· In order to make metal air pouch cell, you can drill holes in the case. We can help you do that at extra cost

· You may use MTI die cutter to prepare electrode via layer by layer or make winding type pouch cell electrode (click picture below to see the machine)