X-RAY Testing Machine For Internal Defects Detection Of Prismatic Battery Production Process

Ⅰ、Equipment Introduction：
1.1 Application area：
The equipment is mainly used for the observation of internal defects of products in the battery industry, semiconductor parts production, electronic product processing, solid substrate, electronic product packaging, power supply and other industries.
1.2 Introduction to equipment functions and principles：
The equipment emits X-rays through the X-ray generator and penetrates the inside of the tested object. The image intensifier receives the X-rays and takes images and photographs. The defects of the tested object are determined manually according to the images.

Ⅱ、Main Parameters:

Item	Details
X-RAY  Voltage	Max 90 kV
X-RAY  Current	Max 200uA(Software limit value:Max:89uA）
Warranty period of X-ray tube	Accumulated warranty time≥6000h
Image intensifier	4 "image intensifier
Imaging system resolution	75/110  lp/cm
Warranty period of booster	Accumulated warranty time≥6000h
Number of imaging systems	1set
X-CCD	≥1.3 million pixels
Repeat test accuracy	±0.06mm(Standard sheet measurement）
Equipment utilization rate	≥98%
Stage size	510mm X 460mm
Effective detection range	450mmX410mm
X Radiation leakage	≤1.0 μSV/h（Radiation dose tester certified by a third party shall be used）
Computer configuration	Advantech, i5 processor, 4G memory, 1TB hard disk, 21.5-inch display
Detection method:	Offline measurement mode, automatic navigation, manual observation and manual judgment

Ⅲ、Equipment component description：

3.1 Micro focus X-ray generator and control system;；

3.2 X-ray detection imaging system;

3.3 X-ray protection box;

3.4 Electrical control system;

3.5 Control PC and image processing;

3.6 Automatic power-off protection device;

3.7 Three color light equipment status reminder;

3.8 Photoelectric induction control device;

3.9 The metal plate and perspective window of the whole machine are embedded with lead plate to ensure radiation safety and prevent radiation leakage;

3.10 Navigation device;

 

Ⅳ、Process operation process requirements：

Ⅴ、General configuration and standard of equipment：

5.1  Equipment appearance color: warm gray 1C (or subject to the customer's color plate).

5.2  Measured 1m away from the equipment (operation position), the equipment noise is ≤ 75db.

5.3  The equipment complies with the safety standards of China for electromechanical equipment.

5.4 Size：L1200mm×W1100mm×H1830mm（The specific size shall be subject to the actual object）

5.5 Total weight: 760KG

5.6 Ambient temperature：25±3℃ 

5.7 Ambient humidity: ≤ 60% RH (no condensation)

5.8 Power：2.5KW

Product Image