Laboratory Stainless Steel Glove Box With Vacuum Flange

Introduction
The vacuum glove box is also known as the vacuum inert gas glove box. In the process of scientific experiments, some substances are easily oxidized and deliquescent in the atmospheric state, which makes the chemical reaction of the test substance and the pretreatment of the sample very difficult, affecting the test process and test results. The vacuum glove box (also known as the vacuum inert gas operation box) effectively solves these problems. The device can make the test sample safely put in and out, and operate, react and test freely in the oxygen-free and anhydrous state, ensuring the normal conduct of scientific experiments. This product is an ideal device for universities, scientific research institutions and enterprise laboratories to carry out scientific experiments. It is widely used in biochemical, metallurgical, electronic, chemical, geological, mineral, pharmaceutical and other industries.
Stainless steel vacuum glove box is a laboratory equipment that fills high-purity inert gas into the box and circularly filters out the active substances in it, also known as glove box, inert gas protection box, dry box, etc.

Principle
The stainless steel vacuum glove box is mainly composed of the main box, the transition chamber and the frame. If the user has other special requirements, it can also be designed or modified as required; There are two or three glove operation interfaces on the box. The front of the operation box is tempered glass, with a wide angle of view and no dead angle. The operator can clearly observe the operation process inside the box, making the operation process more intuitive in front of the operator. There are two vacuum ball valves on the tank and transition tank for air inlet and outlet. The KF40 vacuum connector is reserved on the tank, which can be used by users according to their needs, and can be accessed if water or ventilation is required. The box is equipped with a built-in lamp and a perforated socket.

Features
1. The whole box is made of stainless steel, reinforced and sprayed with plastic on the surface, so it is strong, corrosion resistant and easy to clean;
2. The front of the operation box is made of plexiglass, with a wide angle of view and no dead angle;
3. The box is equipped with lighting lamp and perforated socket;
4. The operation gloves are made of imported butyl gloves, which are reliable and durable;
5. The sealing device has novel design, reliable sealing and convenient opening;
6. KF40 vacuum connector is reserved in the box, which can be modified and used according to needs;
7. The two doors of the transition chamber solve the problem of repeatedly vacuuming the main box.
Precautions for product use
1. Before use, check whether the connectors are loose and whether the seals are intact;
2. It is forbidden to open the hatch and glove cover under vacuum or conduct disassembly and maintenance;
3. The glove opening shall be vacuumized with the box first or at the same time, and then vacuumized with the box at or at the same time;
4. The connection of the external air source pipe fittings shall be tightly sealed. When the pointer of the vacuum pressure gauge points to 0 when the box is in air, the air inlet valve shall be closed;
5. After vacuuming, close the valve first and then close the vacuum pump;
6. Check whether the glove valve is open during air extraction.

Parameters