Semi Automatic BMS Lithium Battery Protection Board Testers
1. Application and Function Introduction
1.1 Application:
The semi-automatic test platform cooperates with 1-6 PBTS / PBTS (m) protection board testers. By changing the fixture of the test platform, the customer realizes the cycle test process of single person loading the board, starting the test, automatically marking the error points on the platform after the test, and manually taking and changing the board. It can easily realize the effect of one person controlling 20 protection board testers, save labor and ensure the detection accuracy at the same time.
2.Function introduction:
|
Application
|
For semi-automatic test of protection board
|
|
Basic function
|
Overcharge and discharge voltage test
|
|
Overcharge recovery and discharge recovery test
|
|
Internal resistance test
|
|
Equalizing voltage and current test
|
|
Overcurrent protection test
|
|
Unique test items
|
The equipment can be retested to avoid false measurement due to poor contact of fixture
|
|
Test pass mark + test error mark
|
|
Test and make-up statistics, monitor test output and pass rate statistics
|
|
Type of protection plate
|
Lithium iron phosphate, lithium ternary cobalt oxide, lithium manganate, etc
|
|
Parameter
|
Test scope
|
|
Maximum board width supported
|
300mm
|
|
Maximum board length supported
|
300mm
|
|
Maximum number of board rows supported
|
1-10
|
|
Maximum number of board columns supported
|
1-10
|
|
The special size of the puzzle needs to be customized
|
|
Test Items
|
Test Scope
|
Accuracy
|
|
Equipment channel
|
1-6
|
Optional
|
|
Number of test series
|
1-24 series
|
Optional
|
|
Reference voltage
|
LiCoO2(3.8V) LiFePO4(3.0V)
|
|
|
Overcharge protection voltage
|
0.5-5V
|
±1mV
|
|
Over discharge protection voltage
|
0.5-5V
|
±1mV
|
|
Overcharge recovery voltage (Self recovery)
|
0.5-5V
|
±1mV
|
|
Over discharge recovery voltage (Self recovery)
|
0.5-5V
|
±1mV
|
|
Overcharge protection current
|
1-40A
|
±0.1A
|
|
Over discharge protection current
|
1-20A
|
±0.1A
|
|
Equalizing opening voltage
|
0.5-5V
|
±5mV
|
|
Equalizing real-time current
|
0-200mA
|
±1mA
|
|
Overcurrent protection delay
|
0-15S
|
±1mS
|
|
Overcharge protection delay
|
0-20S
|
±1mS
|
|
Over discharge protection delay
|
0-20S
|
±1mS
|
|
Single section self power consumption
|
0-500uA
|
±1uA
|
|
Loop internal resistance
|
0-200mΩ
|
±1mΩ
|
|
Online settings
|
serial communication:RS232 serial port
|
|
Semi automatic detection platform
|
600*700mm（W*D）
|
|
Test cabinet
|
1060*600*650mm（W*D*H）
|
|
Channel
|
6（Optional）
|
|
Equipment accessories
|
User manual and upper computer software
|
3.Environmental requirements and technical parameters of equipment
3.1 power supply: AC voltage 220V ± 10%, frequency 50Hz ± 10%;
3.2 ambient temperature: - 10 ~ 45 ℃;
3.3 the environment is free from strong vibration, corrosive gas and flammable and explosive gas.
Online service
+86 13174506016
