1700C High Temperature Muffle Furnace For Lab Material Sintering
Introduction
LITH-1700Muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface.
Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.
Features
1 Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
2 Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
3 Built-in computer interface.
4 Long life type B thermocouple.
5 CE compliant
Safety
1 Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
2 Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
General specifications
Electrical requirements
110-240VAC, 50/60Hz, single phase
Min. working temperature
300°C (572°F) recommend at least 800°C for longer heating element life
Max./constant working temperatures
1700°C (3092°F) / 1600°C (2912°F)
Refractory lining
Mitsubishi (Japan) high quality grade 1800 fiber alumina
Heating element & thermocouple type
Molybdenum Silicide (MoSi2) / B-type
Temperature controller
Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments)
Online service
+86 13174506016
